UPS program strives to make boxes more protective

o Place another piece of corrugated cardboard on top of that.

o Add more packing peanuts a little higher than the brim.

o Close the box and use packing tape on all the seams.

Men’s suits arriving at the store wrinkled? That’s a job for UPS’ Quint Marini and his team of eight packaging engineers. Their new design for a perfect suit box solved the problem by layering 10 suits on hangers in alternate directions and keeping them in place with a built-in strap.

“It took us five months,” Marini said. “First we were going to put each suit on a piece of corrugated (cardboard) and tag it to it. That didn’t work. Then someone came up with this design. But it took three months to make sure.”

Boxes to protect fragile frosting on cupcakes, to keep cheesecakes cold, to keep pharmaceuticals at room temperature — Marini’s team has designed them. Their busiest time is summer when companies get ready to launch new products.

A typical testing workout takes four hours. Boxes get a 900-pound hug from the compression table. They crash 17 times from the drop tester. They endure the cruelty of the bridge impact tester, which slams into them from the sky like a karate chop. They shake for two hours on the vibration table, which mimics a bumpy truck ride. The altitude chamber simulates flight conditions; it can explode a bag of potato chips.

To demonstrate a typical test, packaging engineer Kyle Blakey switches on a pneumatic compression table. A box withstands 900 pounds of force, but eventually the box buckles under an iron plate when Blakey turns the force up to 2,000 pounds.

Other shipping companies, including FedEx Corp., have similar labs.

Marini gets some odd requests.

One supplier of reptile foods wanted to ship dead rats and live crickets in the same truck. Marini advised against it: The dry ice needed to keep the rats from decomposing would have suffocated the crickets.

Another unusual challenge: protecting two forensic facial reconstructions of Civil War sailors during a trip from Baton Rouge, La., to Washington, D.C. Experts at Louisiana State University had modeled the unique life-size heads from skulls found in the turret of the USS Monitor after it was raised from the ocean floor.

The heads — made of soft clay and resin — were to be unveiled at a ceremony commemorating the 150th anniversary of the ship’s sinking. It would be the first time the public saw the shipmates’ faces.

Marini’s team built each head a super shock-absorbing box from wood, cardboard and plastic foam.

“They were very, very fragile,” he said simply. “They made it.”

Marini packed a box recently in the lab and had his crew drop it repeatedly from the drop tester. The ornaments and snow globe he packed inside survived perfectly.